Due to technical problems, we are currently unable to provide you with all shop functions.

We are working hard to eliminate these problems and give you access to the functions again as soon as possible.

You probably do not come from: Germany.  If necessary, change to: United States
  1. Homepage
  2. Products
  3. Condition monitoring systems
  4. Systems for vibration monitoring and diagnostics
  5. Vibration sensors and transmitters
  6. VVB020

Vibration sensor

VVB020

VIBRATION IO-LINK SWITCH

Vibration sensor

VVB020

VIBRATION IO-LINK SWITCH

  • Condition-based maintenance thanks to monitoring of unbalance, rolling element bearing or gear state
  • Large operating temperature range and high protection rating for the requirements of harsh industrial environments
  • Reliable and permanent monitoring of characteristic values incl. triggered raw data recording
  • Integration in Industrial Ethernet systems without control cabinet and complex wiring
  • Asynchronous transmission of raw data (BLOB) and integrated machine operating hours counter
{{ifmVariantName}}



  • ce
  • ukca
  • eac
  • iolink
  • cul
Technical details
Product characteristics
Frequency range [Hz] 2...10000
Measuring principle capacitive
v-RMS
Measuring range of vibration [mm/s] 0...45
a-Peak / a-RMS
Measuring range of vibration
0...50 g 0...490.3 m/s²
Application
Application medium-sized machines, power < 300 kW, rotational speed > 600 rpm
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 50
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Sensor type microelectromechanical system (MEMS)
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2
Outputs
Output signal switching signal; IO-Link
Electrical design PNP/NPN; (configurable)
Number of digital outputs 2
Output function normally open / normally closed
Max. voltage drop switching output DC [V] 2
Max. current load per output [mA] 100
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Note on setpoint SP
parameterisable
Frequency range [Hz] 2...10000
Measuring principle capacitive
Number of measurement axes 1
v-RMS
Measuring range of vibration [mm/s] 0...45
Set point SP [mm/s] 0.2...45
Reset point rP [mm/s] 0...44.8
In steps of [mm/s] 0.2
a-Peak / a-RMS
Measuring range of vibration
0...50 g 0...490.3 m/s²
Set point SP
0.2...50 g 2...490.3 m/s²
Reset point rP
0...49.8 g 0...488.3 m/s²
In steps of
0.2 g 2 m/s²
Crest
Measuring range of vibration 1...50
Set point SP 2...50
Reset point rP 1...49
In steps of 1
Temperature measurement
Measuring range [°C] -30...80
Resolution [°C] 0.1
Set point SP [°C] -28...80
Reset point rP [°C] -30...78
In steps of [°C] 2
Accuracy / deviations
Accuracy ≤ 4 kHz +/-10 %; ≥ 4...10 kHz: < 3 dB
Accuracy [K] ± 2,5 K + (0,2 x (Umgebungstemperatur - Oberflächentemperatur))
Linearity deviation 2 %
Software / programming
Parameter setting options Software
Diagnostic functions self-test
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud); COM3 (230,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9: 2013-07
Profiles Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000)
SIO mode yes
Required master port type A
Process data analogue 10
Process data binary 2
Min. process cycle time [ms] 3.6
IO-Link functions (acyclical) filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; switch points; switching logic
Supported DeviceIDs
Type of operation DeviceID
Status A (COM2) 1257
Status B (COM2 / COM3) 1369
Note
For further information please see the IODD PDF file under "Downloads"
Operating conditions
Ambient temperature [°C] -30...80
Storage temperature [°C] -30...80
Protection IP 67; IP 68; IP 69K
Tests / approvals
EMC
2014/30/EU
DIN EN 61000-6-2
DIN EN 61000-6-3
DIN EN 50178
Shock resistance
DIN EN 60068-2-27 50 g 11 ms
Vibration resistance
DIN EN 60068-2-6 20 g / 10...3000 Hz
MTTF [years] 299
UL approval
Ta -30...70 °C
UL Approval no. L002
Mechanical data
Weight [g] 116.5
Type of mounting set screw
Materials housing: stainless steel (1.4404 / 316L)
Tightening torque [Nm] 8
Accessories
Items supplied
set screw: 1 x 1/4" 28 UNF / M8
set screw: 1 x 1/4"28 UNF x 5/8" DIN916
Remarks
Pack quantity 1 pcs.
Electrical connection
Connector: 1 x M12; Maximum cable length: 20 m
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — VVB020-01 — 18.11.2020 —

Videos