Replaced by: DI505A
– Product comparison: DI502A / DI505A
{{'OPTIONAL_INFO' | productAvailability | error}}
Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.
Best regards
Your ifm team
| Product characteristics | |||
|---|---|---|---|
| Electrical design | PNP | ||
| Output function | normally open | ||
| Sensing range [mm] | 10 | ||
| Dimensions [mm] | M30 x 1.5 / L = 82 | ||
| Application | |||
| Application | simple evaluation of rotating and linear movement with regard to underspeed; blocking | ||
| Electrical data | |||
| Nominal voltage DC [V] | 10...36 | ||
| Current consumption [mA] | < 15 | ||
| Protection class | III | ||
| Reverse polarity protection | yes | ||
| Outputs | |||
| Total number of outputs | 1 | ||
| Electrical design | PNP | ||
| Output function | normally open | ||
| Max. voltage drop switching output DC [V] | 2.5 | ||
| Permanent current rating of switching output DC [mA] | 250 | ||
| Short-time current rating of switching output [mA] | 250 | ||
| Switching frequency DC [Hz] | 100 | ||
| Short-circuit proof | yes | ||
| Overload protection | yes | ||
| Detection zone | |||
| Sensing range [mm] | 10 | ||
| Sensing range adjustable | no | ||
| Measuring/setting range | |||
| Setting range [Imp/min] | 5...300 | ||
| Accuracy / deviations | |||
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.3 | ||
| Hysteresis [% of Sr] | 10 | ||
| Response times | |||
| Start-up delay [s] | 15; (typical) | ||
| Max. damping frequency [Imp/min] | 15000 | ||
| Software / programming | |||
| Adjustment of the switch point | multiturn potentiometer | ||
| Operating conditions | |||
| Ambient temperature [°C] | -20...60 | ||
| Protection | IP 67 | ||
| Tests / approvals | |||
| ATEX marking | |||
| EMC |
|
||
| MTTF [years] | 898 | ||
| Mechanical data | |||
| Weight [g] | 0.209 | ||
| Mounting | flush mountable | ||
| Dimensions [mm] | M30 x 1.5 / L = 82 | ||
| Thread designation | M30 x 1.5 | ||
| Materials | brass special coating; PBT | ||
| Displays / operating elements | |||
| Display |
|
||
| Electrical connection | |||
| Connection | Connector: 1 x M12 | ||
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — EN-GB — DI502A — 27.09.2017 —
|
|||
