1. Homepage
  2. Products
  3. AC014A

Article no longer available - archive entry

Replaced by: AC514A + E7000A – Product comparison: AC014A / AC514A

AC014A

AS-Interface ClassicLine module

ClassicL45 2DO-y 2DI-y T M12

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • ce
  • asib
Download
Technische Details
Electrical data
Operating voltage [V] 26.5...31.6 DC
Current consumption [mA] < 150
Max. current load total [A] 2
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 2; Number of digital outputs: 2
Inputs
Number of digital inputs 2
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30; (utilisation category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1))
Max. total current rating of inputs [mA] 100
Input current High [mA] 6...10
Input current Low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Outputs
Electrical design AS-i
Number of digital outputs 2
Voltage range DC [V] 15...30; (to PELV; via flat cable)
Max. current load per output [mA] 1000; (utilisation category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1))
Short-circuit proof yes
Electrically separated yes
Operating conditions
Ambient temperature [°C] 0...40
Protection IP 67
Tests / approvals
ATEX marking II 3G EEx nA II T6 X
II 3D T60 °C IP 67 X
EMC
EN 50295
AS-i classification
AS-i version 2.1
AS-i addressing IR addressing possible
Extended addressing mode possible yes
AS-i profile S-B.A.E
AS-i I/O configuration [hex] B
AS-i ID code [hex] A.E
AS-i certificate pending yes
Assignment of the data bits
data bit D0 D1 D2 D3
input - - 3 4
socket - - I-3/4 I-3/4 I-4
pin - - 4 2 4
Output 1 2 - -
socket O-1/2 O-1/2 / O-2 - -
pin 4 2 4 - -
Mechanical data
Type of mounting AS-i interface to FC-E lower parts
Materials PBT
Displays / operating elements
Display
operation LED, green
errors LED, red
function LED, yellow
Remarks
Remarks
Inputs and outputs must be electrically isolated.
Do not connect any of the following points to an external potential:
I-, I+, I-3/4, I-4
The connections are electrically connected with the AS-i cable.
Use M12 connectors with hexagon nuts, tightening torque 0.8 Nm.
Pack quantity 1 pcs.
Electrical connection
Connection contact pins to module lower part, FK-E:
Connection Connector: M12
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — EN-GB — AC014A — 09.12.2005 —