You probably do not come from: Chile.  If necessary, change to: United States
  1. Homepage
  2. LDL sensors: Conductivity – a new approach
  3. IO-Link benefits

LDL sensors: IO-Link benefits

With IO-Link, the LDL family can provide:

  • Conductivity and temperature value over a single wire
  • High measurement resolution without scaling
  • On-the-fly recipe changes and device adjustment
  • Current device status
  • Operating hours histogram
  • Internal memory for min and max conductivity / temperature
  • Automatic device replacement

Using IO-Link, the resolution of the conductivity value is the same throughout the measuring range. This is especially important when using the inductive (toroidal) version. A typical CIP process uses chemicals with high conductivity and rinse water with low conductivity. When using an analog output, the signal is spread out over a greater range, reducing the ability to detect small changes in conductivity. This can lead to residual amounts of chemicals going undetected in rinse water or products.


Comparison of resolution of IO-Link and analog signals

Measuring range


PLC analog input card

             (12 bit)

IO-Link *
0...500                1 µS/cm  1 µS/cm
0...5,000                2 µS/cm
0...15,000                4 µS/cm
0...100,000              25 µS/cm
0...500,000            122 µS/cm
0...1,000,000            244 µS/cm

*  LDL100 measuring range is limited to 15,000 µS/cm