1. Homepage
  2. Products
  3. Industrial communication
  4. AS-Interface I/O modules
  5. PCB solutions
  6. AC2752

AC2752

AS-Interface PCB module

PCB 4DI 4DO T C A/B

{{'OPTIONAL_INFO' | productAvailability | error}}

Dear customer,
Unfortunately, this data sheet is not available in the requested language. If you have any further questions, you can contact us by e-mail.

Best regards
Your ifm team

  • For installation in small housings, control cabinets and operator panels
  • Simple and fast wiring by means of screw terminals
  • Particularly space-saving design
  • For integration of mechanical switches into AS-i networks
  • AS-i connection for four control and signalling devices
  • ce
  • eac
  • asi
  • cruus
Download
Technische Details
Application
Application only for operation with AS-i masters with the profile M4
Electrical data
Operating voltage [V] 18...31.6 DC
Max. current consumption from AS-i [mA] 180; (without sensors: < 30 mA; inputs and outputs active: < 180 mA)
Protection class III
Max. current load total [A] 0.15; (total current for all outputs and sensor supply supplied from AS-i: 150 mA)
Integrated watchdog yes
Inputs / outputs
Number of inputs and outputs Number of digital inputs: 4; Number of digital outputs: 4
Inputs
Number of digital inputs 4
Input circuit of digital inputs PNP
Sensor supply of the inputs AS-i
Voltage supply [V] 18...30
Max. total current rating of inputs [mA] 150
Input current High [mA] 6...10
Input current Low [mA] 0...2
Min. switching level high signal [V] 11
Digital inputs protected against short circuits yes
Outputs
Number of digital outputs 4
Circuit PNP
Voltage range DC [V] AS-i
Max. current load per output [mA] 100; (utilisation category DC-13 (control of electromagnets): 2,5 W (IEC 60947-5-1))
Short-circuit proof yes
Electrically separated yes
Operating conditions
Ambient temperature [°C] -25...55
Protection IP 20
Tests / approvals
EMC
EN 50295
MTTF [years] 220
AS-i classification
AS-i version 3.0
Extended addressing mode possible yes
AS-i profile S-7.A.7
AS-i I/O configuration [hex] 7
AS-i ID code [hex] A.7
AS-i certificate 102301
Mechanical data
Weight [g] 68
Type of mounting installation in a surface-mounted housing
Dimensions [mm] 31.1 x 12 x 76.6
Materials housing: PC potted
Displays / operating elements
Display
operation LED, green
errors LED, red
function LED, yellow
Remarks
Remarks
A watchdog function switches the outputs off if there is no communication on the AS-i line.
Install the unit so that exposed parts cannot be touched.
Installation in a surface-mounted housing with the dimensions of 68 x 136 x 53 mm (LxWxH), e.g. Schneider Electric Harmony, XALD03, XALD04
Do not connect any of the following points to an external potential:
0-, I+, I1, I2, I3, I4
The connections are electrically connected with the AS-i cable.
can be used up to a height of 2000 metres above sea level
Pack quantity 1 pcs.
Electrical connection
screw terminals:
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — AC2752-01 — 12.10.2015 —