| Product characteristics |
| Resolution |
4096 resolution; 4096 steps; 12 bit |
| Communication interface |
SSI data interface |
| Shaft design |
solid shaft |
| Shaft diameter [mm] |
10 |
| Electrical data |
| Operating voltage [V] |
10...30 DC |
| Current consumption [mA] |
< 150 |
| Outputs |
| Code |
Gray code; (increasing code values when turned clockwise (seen on the shaft)) |
| Code signal |
data input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 485; data output; synchronous serial; TTL-compatible signals, data, and data (inv.); incremental signals; 2 sinusoidal incremental signals (A and B) ; phase shifted by 90°; 1 Vss 512 signal periods per revolution |
| Measuring/setting range |
| Resolution |
4096 resolution; 4096 steps; 12 bit |
| Interfaces |
| Communication interface |
SSI data interface |
| Operating conditions |
| Ambient temperature [°C] |
-40...85 |
| Max. relative air humidity [%] |
75; (briefly: 95 %) |
| Protection |
IP 64 |
| Tests / approvals |
| Shock resistance |
|
| Vibration resistance |
|
| Mechanical data |
| Dimensions [mm] |
Ø 58 / L = 66.7 |
| Materials |
aluminium |
| Max. revolution, mechanical [U/min] |
12000 |
| Max. starting torque [Nm] |
1 |
| Reference temperature torque [°C] |
20 |
| Shaft design |
solid shaft |
| Shaft diameter [mm] |
10 |
| Shaft material |
|
| Max. shaft load axial (at the shaft end) [N] |
10 |
| Max. shaft load radial (at the shaft end) [N] |
20 |
| Remarks |
| Remarks |
| Wires/pins not connected (n.c.) must not be used. |
|
| Electrical connection |
|
Cable: 1 m, PUR; Maximum cable length: 150 m; radial, can also be used axially |
| Diagrams and graphs |
| Pulse diagram |
|
