PN2223

|‌ PN-025-RBN14-MFRKG/US/ /V

Pressure sensors

Made in Germany
DrawingWiring3D PDF PDF data sheet   Print Version

Collapse all categories
1: 4-digit alphanumeric display
2: LEDs (display unit / switching status)
3: Programming button
Made in Germany
Product characteristics
Combined pressure sensor
Quick disconnect
Communication interface: IO-Link 1.0
(COM2 slave, 38.4 kBaud)
Zero and span adjustable
Function programmable
Process connection: ¼'' NPT
2 outputs
OUT1 = switching output
OUT2 = switching output or analog output
4-digit alphanumeric display
Measuring range: -14.5...362.5 psi / -1...25 bar / -0.1..2.5 MPa
Application
Application Type of pressure: relative pressure
Liquids and gases
Pressure rating 1450 psi100 bar10 MPa
Bursting pressure min. 5075 psi350 bar35 MPa
Medium temperature [°C]-25...80
Electrical data
Electrical design DC PNP/NPN
Operating voltage [V]18...32 DC ¹)
Current consumption [mA]< 35
Insulation resistance [MΩ]> 100 (500 V DC)
Protection class III
Reverse polarity protection yes
Outputs
Output 2 outputs
OUT1 = switching output
OUT2 = switching output or analog output
Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analog (4...20 mA / 0...10 V; programmable 1:4)
Current rating [mA]2 x 250
Voltage drop [V]< 2
Short-circuit protection Yes (non-latching)
Overload protection yes
Switching frequency [Hz]≤ 500
Analog output 4...20 mA / 0...10 V
Max. load [Ω]4...20 mA: max. (Ub - 10 V) x 50 / 0...10 V: min. 2000
Measuring / setting range
Measuring range -14.5...362.5 psi-1...25 bar-0.1..2.5 MPa
Setting range
Set point, SP -11.5...362.5 psi -0.80...25.00 bar -0.08...2.50 MPa
Reset point, rP -13.0...361.0 psi -0.90...24.90 bar -0.09...2.49 MPa
Analog start point, ASP -14.5...272.0 psi -1.00...18.75 bar -0.10...1.88 MPa
Analog end point, AEP 76.0...362.5 psi 5.25...25.00 bar 0.53...2.50 MPa
in steps of 0.5 psi 0.05 bar 0.01 MPa
Factory setting SP1 = 90.5 psi; rP1 = 83.5 psi
SP2 = 272.0 psi; rP2 = 264.5 psi
ASP = 0.0 psi; AEP = 362.5 psi
Accuracy / deviations
Accuracy / deviations
(in % of the span) Turn down 1:1
Switch point accuracy < ± 0.4
Characteristics deviation *) < ± 0.25 (BFSL) / < ± 0.5 (LS)
Hysteresis < ± 0.1
Repeatability **) < ± 0.1
Long-term stability ***) < ± 0.1
Temperature coefficients (TEMPCO) in the temperature range 0...80° C (in % of the span per 10 K)
Greatest TEMPCO of the zero point < ± 0.2
Greatest TEMPCO of the span < ± 0.2
Reaction times
Power-on delay time [s]0.3
Min. response time switching output [ms]1.5
Damping for the switching output (dAP) [s]0; 0.01...4.00
Damping for the analog output (dAA) [s]0; 0.01...4.00
Response time analog output [ms]3
Integrated watchdog yes
Software / programming
Programming options hysteresis / window function; N.O. / N.C; output polarity; current / voltage outputs; damping; calibration of displayed values; display can be rotated / deactivated; display unit
Environment
Ambient temperature [°C]-25...80
Storage temperature [°C]-40...100
Protection IP 65
Tests / approvals
EMC
EN 61000-4-2 ESD:  4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated:  10 V/m
EN 61000-4-4 Burst:  2 kV
EN 61000-4-5 Surge:  0.5/1 kV
EN 61000-4-6 HF conducted:  10 V
Shock resistance
DIN IEC 68-2-27: 50 g (11 ms)  
Vibration resistance
DIN IEC 68-2-6: 20 g (10...2000 Hz)  
MTTF [Years]131
Mechanical data
Process connection ¼'' NPT
Materials (wetted parts) stainless steel (303S22); ceramics; FPM (Viton)
Housing materials stainless steel (304S15); stainless steel 316L / 1.4404; PC (Makrolon); PBT (Pocan); PEI; FPM (Viton); PTFE
Switching cycles min. 100 million
Weight [kg]0.268
Displays / operating elements
Display
Display unit  3 x LED green
Switching status  2 x LED yellow
Function display  4-digit alphanumeric display
Measured values  4-digit alphanumeric display
Electrical connection
Connection M12 connector; gold-plated contacts
Wiring

Programming of the output function
(OUT1 / OUT2):
Hno = hysteresis / normally open
Hnc = hysteresis / normally closed
Fno = window function / normally open
Fnc = window function / normally closed
Complementary outputs:
output 1: = Hno, output 2: = Hnc
(with the same SP / rP)

Programming of the analog output (OUT2):
I = current output (4...20 mA)
U = voltage output (0...10 V)
Remarks
Remarks
¹) to EN50178, SELV, PELV
*) BFSL = Best Fit Straight Line / LS = Limit Value Setting
**) with temperature fluctuations < 10 K
***) in % of the span per year
Pack quantity [piece]1
ifm efector, inc. 782 Springdale Drive, Exton, PA 19341  —  We reserve the right to make technical alterations without prior notice.  —  US  —  PN2223  —  30.10.2013
 
up | Select language | PDF data sheet | Print Version
Approvals, classifications as well as product news, animations and videos on this product