IGM201

|‌ IGKC012-ASKG/M/US-104-DRS

Inductive sensors

Made in Germany
DrawingWiring3D PDF PDF data sheet   Print Version


Collapse all categories
Made in Germany
Product characteristics
Inductive sensor
Metal thread M18 x 1
Quick disconnect
e1 type approval
Increased sensing range
gold-plated contacts
Sensing range 12 mm; [nf] non-flush mountable
Electrical data
Electrical design 3-wire DC PNP; 2-wire DC PNP/NPN
Operating voltage [V]10...36 DC
Current consumption [mA]< 10; only in 3-wire operation
Protection class II
Reverse polarity protection yes
Outputs
Output function normally open
Voltage drop [V]< 2.5
Minimum load current [mA]> 2; only in 2-wire operation
Leakage current [mA]< 0.5
Current rating [mA]100
Short-circuit protection Yes (non-latching)
Overload protection yes
Switching frequency [Hz]200
Monitoring range
Sensing range [mm]12
Real sensing range (Sr) [mm]12 ± 10 %
Operating distance [mm]0...9.72
Accuracy / deviations
Correction factors mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.5 / aluminium approx. 0.46 / Cu approx. 0.4
Hysteresis [% of Sr]1...20
Switch-point drift [% of Sr]-10...10
Environment
Ambient temperature [°C]-40...85
Protection IP 67 / IP 69K
Tests / approvals
EMC
Automotive area 
Noise emission and noise interference according to the automotive directive 95/54/EC  (e1 type approval)
Noise interference according to DIN ISO 11452-2:  100 V/m
Conducted interference according to ISO 7637-2 
Pulse  1 2 3a 3b 4 5
Severity level  IV IV IV IV IV IV
Failure criterion  C C A A A C
EN 61000-4-2 ESD:  4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated:  10 V/m (80...2000 MHz)
EN 61000-4-4 Burst:  2 kV
EN 61000-4-5 Surge:  0.5 kV (line to line, Ri: 2Ohm)
EN 61000-4-6 HF conducted:  10 V (0.15...80 MHz)
EN 55011:  class B
Environmental Inspection Rating Vibration Test (EN 60068-2-6 Fc):
20 g acceleration; from 10 to 3000 Hz at -20 °C and 50 °C; 50 cycles per frequency; 1 octave per minute in each of 3 mutually perpendicular axes.

Shock Test (EN 60068-2-27 Ea):
100 g acceleration; 11 ms half sine wave pulse shape with 3 shocks in each direction along the three coordinate axis at -40 °C and 85 °C.

Continuous Shock Test (EN 60068-2-29 Eb):
40 g acceleration; 6 ms with 4000 shocks in any direction along the 3 coordinate axis at -20 °C and 50 °C.

Rapid Temperature Change Test (EN 60068-2-14 Na):
Sensor is alternately put in -40 °C environment for 30 minutes and 85 °C environment for 30 min. The transfer between environments must occur in less than 10 seconds. Test is repeated for 50 cycles.

Salt Spray Test (EN 60068-2-52 Kb):
Severity level 5 (4 test cycles)
MTTF [Years]1143
Mechanical data
Mounting non-flush mountable
Housing materials housing: stainless steel; active face: PBT; lock nuts: brass
Weight [kg]0.054
Displays / operating elements
Output status indication LEDyellow (4 x 90°)
Electrical connection
Connection M12 connector; gold-plated contacts
Wiring
Accessories
Accessories (included) 2 lock nuts
Remarks
Pack quantity [piece]1
ifm efector, inc. 782 Springdale Drive, Exton, PA 19341  —  We reserve the right to make technical alterations without prior notice.  —  US  —  IGM201  —  25.11.2005
 
up | Select language | PDF data sheet | Print Version | 
Approvals, classifications as well as product news, animations and videos on this product