ZB0040

|‌ PowerSwitch 6.3 2.2KW

Bus system AS-Interface

Made in Germany
DrawingWiring3D PDF PDF data sheet   Print Version


2 Years Warranty
Collapse all categories
Made in Germany
Product characteristics
Active AS-i Module
PowerSwitch - Motor starters for 400 V - three-phase motors
Backplane mounting
Motor connections via Harting connector Han Q5
Motor-protective circuit breaker 4.5...6.3 A
Reversing contactor circuit for two directions
2 external digital inputs and 2 outputs through M12 connector
Electrical data
Electrical design 4 inputs / 4 outputs
Operating voltage [V]26.5...31.6 DC
Total current consumption from AS-i [mA]< 250
Max. current load per module [mA]300 mA / 16 A
Inputs
Digital
Input circuit PNP
Sensor supply AS-i
Voltage range [V]20...30 DC
Max. current load for all inputs total [mA]< 140
Input current High/Low [mA]> 6 / < 2
Switching level High signal 1 [V]> 10
Short-circuit proof yes
Outputs
Digital
Output function Reversing contactor and transistor
Voltage range [V]18...30 DC / 110...400 AC
External voltage supply according to PELV
Max. current load per output [mA]150 *)
Electrically separated yes
Integrated watchdog yes
Environment
Ambient temperature [°C]0...60
Protection IP 54
Tests / approvals
EMC
EN 50081-1 
EN 61000-6-2 
AS-i classification
Extended addressing mode possible Version 2.0 / no
AS-i profile S-7.0
I/O configuration [hex] 7
ID code [Hex] 0
AS-i certificate 06101
Mechanical data
Housing materials polycarbonate (glass fiber reinforced); flame-retardant; UV resistant
Dimension [mm] 182 x 180 x 90 (B x H x T)
Weight [kg]1.86
Displays / operating elements
Output status indication LEDyellow
Operation LEDgreen
Error LEDred
Electrical connection
Wiring
  400 V connection and motor socket
L1:  contact number 1
L2:  contact number 2
L3:  contact number 3
PE:  reserved PE
 
  supply voltage connector
Pin 1:  AS-i +
Pin 2:  24V DC -
Pin 3:  AS-i -
Pin 4:  24V DC +
  2 x M12 input socket
Pin 1:  I+
Pin 2/4:  Input (bridged)
Pin 3:  I-
 
  2 x M12 output socket
Pin 1:  n.c.
Pin 2:  n.c.
Pin 3:  24V DC -
Pin 4:  Switching output 24V DC +
Remarks
Remarks
*) ext. outputs protected against short circuits/reversing contactor not protected against short circuits
The PowerSwitch motor starter uses two outputs to trigger the reversing contactors (motor right/left/off). Two further outputs can be connected at will. The messages "motor protection activated" and "hand-held operating panel connected" can be indicated via the input data bits. Sensors can be connected to two additional inputs.
Pack quantity 1
Other data
Output power per channel [kW] 2.2
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen  —  We reserve the right to make technical alterations without prior notice.  —  GB  —  ZB0040  —  06.03.2003
 
up | Select language | PDF data sheet | Print Version | 
Approvals, classifications as well as product news, animations and videos on this product