ifm AS-i sensors, pneumatic and actuator solutions :: AS-i sensors :: Air boxes :: Valve control :: Motor control :: RF identification systems

Product line Product search Product innovations Virtual product animations Specials i-STEP ecomatmobile

Position sensors and object recognition Fluid sensors and diagnostic systems Bus system AS-Interface

Controllers / Gateways, network extension Power supplies and earth fault monitors I/O modules for control cabinets I/O modules for field applications Safety at Work AS-i sensors, pneumatic and actuator solutions

AS-i sensors Air boxes Valve control Motor control RF identification systems

Control systems Identification systems Accessories

AS-i sensors, pneumatic and actuator solutions
	AS-i sensors The bus connection is already integrated in the intelligent AS-i sensors. So they can be directly connected to the yellow cable. In addition to the pure sensor information, further diagnostic data are available via the AS-interface, which can be transmitted and evaluated at a low cost.		Selector	Selection chart
	Air boxes The AS-i AirBoxes are compact pneumatic valves, complemented by digital feedback inputs. They are integrated in a ClassicLine housing and are compatible in terms of space and mounting. The AS-i connection is carried out via the common flat cable or round cable lower parts. 3/2-way and 4/2-way valves are available.		Selector	Selection chart
	Valve control The valve controls for pneumatic quarter-turn actuators can be directly mounted to most quarter-turn actuators by means of the standardised mechanical interface. They contain two inductive sensors for position feedback, one or two outputs for the control of the pilot valve, and an AS-i slave.			Selection chart
	Motor control Decentralised motor starters can be flexibly used. They can control three-phase motors and have additional sensor inputs, e.g. for photoelectric sensors on a conveyor line. Special switch boxes for Movimot and Moviswitch drives make decentralised frequency inverters AS-i compatible.			Selection chart
	RF identification systems RFID systems based on 125 kHz for production and conveying technology, identification of workpiece carriers and products. - System DTS 125 with AS-Interface - System DTE 100 with Profibus DP			Selection chart

| Home | Company | Products | Applications | Service | News | Contact |

©1998-2012 ifm electronic gmbh - Germany -