Toll Free Number 1800 233 2065

Safety technology

Fail-safe inductive sensors

Fail-safe inductive sensorsHere you will find the first electronic fail-safe sensors which do not require a special counterpart but switch directly on the door or a stainless steel or mild steel target. They are wear-free and largely independent from mounting tolerances after a longer use of the doors.
Selection chartSystem description - Fail-safe inductive sensorsProduct Innovations

Safety light curtains

Safety light curtainsWherever motion of machine parts presents a danger to people or goods, safety light curtains or safety light grids are used. The protective equipment ensures that the outputs are switched off which results in a machine halt.
SelectorSelection chartSystem description - Safety light curtainsProduct Innovations

Safety light grids

Safety light gridsWherever motion of machine parts presents a danger to people or goods, safety light curtains or safety light grids are used. The protective equipment ensures that the outputs are switched off which results in a machine halt.
SelectorSelection chartSystem description - Safety light gridsProduct Innovations

Safety relays

Safety relaysMultifunctional with the advantage on your side: The safety relays provide various connection options for safety light curtains, fail-safe inductive sensors or other non-contact guards. They meet the highest requirement with SIL 3 (IEC 61508). "Monitored" or "automatic start" as well as external muting are only some of numerous functions.
Selection chartProduct Innovations

Safety controllers

Safety controllersControllers for safety-related applications to EN 13849, PL d and IEC 62061, SIL cl2 are called "safety controllers". Special test routines for hardware and software are implemented in the devices. The certification of the hardware, operating system software and programming tools makes it easier for the project engineer to get the approval for the machine.
Selection chart

AS-Interface Safety at Work

AS-Interface Safety at WorkThe sophisticated AS-i technology and the extended diagnostic possibilities provide high reliability and machine uptime. "Safety at Work" is the extension of the AS-interface by safety-related components. Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC 61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.
SelectorSelection chartSystem description - AS-Interface Safety at WorkProduct Innovations