Accessories for valve feedback systems

Accessory for valve sensors

The target pucks for dual sensors are directly mounted onto the shaft of the quarter-turn actuator. The shaft must conform to VDI/VDE 3845. A round puck with two targets positioned 90° apart in different heights damps the IND dual sensor or the Tx feedback unit.
Target pucks
Valve sensors target puck Ø 45 mm target puck Ø 53 mm target puck Ø 65 mm target puck Ø 102 mm selection guide for target pucks
Operating principle of the actuator
spring return normally open spring return normally closed double acting
Mounting material for IND
spacers reinforcement brackets Protective caps Plugs for covering the oblong holes cable glands